Effect Of Thermal Treatment On Physical And Chemical Properties Of Recycled Polypropylene
Polypropylene is widely used today in industries and also at home and its production has increase drastically over the years making polypropylene products a major contributor in environmental waste. Therefore, instead of throwing away wasted or unusable polypropylene to where it may cause harm to the environment and the whole biodiversity, recycling comes to rescue. The objective of this study is to determine the change in properties of polypropylene with recycling. For this purpose, the mechanical properties of polypropylene using five recycling generation were determined.
The polypropylene materials were cut into flakes and pretreated before recycled mechanically at 180-2100C with fabricated mold. ASTM D638 type II specimen dimensions was chosen for tensile test. Ultimate tensile stress test relates the mechanical properties such as tensile strength, elastic modulus and percent elongation to failure to the recycling generations.
The curves which were generated prove that the polypropylene properties decrease with recycling. FTIR analysis affirmed that the chemical structures of the material were not affected by the recycling process.
However, the slight decrease in properties can be compensated by adding a virgin polypropylene at a ratio before recycling. Conservative safety factors and plastics additives, filler inclusion can also correct the decrement.
Recycling of plastic materials is effective in conserving the environment and enhancing the life cycle of these materials.
Introduction
1.1 Background
During last decades, the great population increase worldwide together with the need of people to adopt improved conditions of living led to a dramatically increase of the consumption of polymers (mainly plastics). Materials appear interwoven with our consuming society where it would be hard to imagine a modern society today without plastics which have found a myriad of uses in fields as diverse as household appliances, packaging, construction, medicine, electronics, and automotive and aerospace components. A continued increase in the use of plastics has led to increase the amount of plastics ending up in the waste stream, which then becomes a threat to the environment when the wastes are not decomposable(Hamad et al., 2013). Environmental issues are becoming prioritized in most government and community development agendas. This has motivated the search for economically efficient and ecologically effective material and energy recycling technologies (Petts, 2000). For example, the development and use of strategic technologies driven by recycling credit scheme and the imposition of the landfill tax to preserve landfill void for the future disposal of untreatable residues in England(Read et al.,1998). The potential environmental impacts from plastics are categorized under global warming, acidification, eutrophication and photochemical ozone creation(Bos et al., 2007).
Polypropylene account for around 22% of the total production of plastics in 2008, making it the second largest plastic produced beside polyethylene which is 23.7% (Plastic waste Management Institute, 2009).Polypropylene plastics or also known as polypropene, are materials that are used worldwide since the 19th century (Scheirs, 1998). Polypropylene plastics are widely used in our daily life as kitchen utensils, in toy productions, as insulators for electrical devices, and also in industrial sites as safety equipment(Gaurina-Medijumurec, 2014). Since polypropylene is widely used today in industries and also at home, its production has increase drastically over the years with increasing production of polypropylene made products. Therefore, polypropylene products is a major contributor to the pollution in the world today and now acting as a threat to both man and the whole biodiversity(Anthony, 2003). Itsnon-biodegradability makes post-consumer polypropylene a major environmental issue. Disposal of polypropylene waste by burning is not an environmentally friendly as the gases released are toxic.
Several options have been considered to reduce polypropylene waste such as reuse and recycling (Aurrekoetxeaet al., 2011). The most common examples of reuse are with glass containers, where milk and drinks bottles are returned to be cleaned and used again(Hamad et al., 2013). Reuse is not widely practiced in relation to plastic packaging of plastic products in general tend to be discarded after first use. However, there are examples of reuse in the marketplace. For example, a number of detergent manufacturers market refill sachets for bottled washing liquids and fabric softeners. Consumers can refill and hence reuse their plastic bottles at home, but in all of these cases the reusing of the plastic bottles and containers do not continue for long time especially in the food applications which makes recycling the best alternative.
Mechanical recycling and chemical recycling are the most widely practiced of these methods. However, from industrial point of view, the mechanical recycling is the most suitable because its low cost and reliability (Hamad et al., 2013). Mechanical recycling also known as physical recycling, the plastic is ground down and then reprocessed and compounded to produce a new component that may or may not be the same as its original use (Cui and Forssberg, 2003).
As to this, the recycling of post-consumer polypropylene polymer products is one of the factors in reducing the amount of wastes material produced every day (Harold, 2003). However, until today, the research on the mechanical properties of recycled polypropylene is not widely explored in open literature. Besides that, not much input of the properties of the recycled products either in mechanical or physical properties is comparable with the pure polypropylene materials. Thus, the study on the mechanical properties of the recycled polypropylene product is necessary.
1.2 Project Objective
The main objective of this project are:
- To design and fabricate a mold for purpose of this research
- To determine how physical and chemical properties of polypropylene changes with recycling.
1.3 Justification
Polymer recycling is a way to reduce environmental problems caused by polymeric waste accumulation generated from day-to-day applications of polymer materials such as in packaging and construction. The recycling of polymeric waste helps to conserve natural resource because the most of polymer materials are made from oil and gas. Since recycling has been a solution to reduce environmental problem therefore the limit at which the properties of the materials produce through this method is of high importance.
It is proven theoretically that polypropylene materials take a long time for the properties to deteriorate and also reduce cost of production since no or little virgin polymer is required and energy is conserved.
Abstract
Table of Contents
List of Tables
List of Figures
List of Abbreviations
Chapter One:
Introduction
1.1 Background
1.2 Project objective
1.3 Justification
Chapter Two:
Literature Review
2.1 Plastics
2.2 Plastic recycling
2.2.1 Polyethylene Terephthalate
2.2.2 Polyethylenes
2.2.3 Polyvinyl chloride
2.2.4 Polystyrene
2.3 Polypropylene
2.3.1 History of polypropylene
2.3.2 Molecular structure of polypropylene
2.3.3 Properties of polypropylene
2.3.4 Applications of polypropylene
2.4 Physical and Chemical Testing
2.4.1 Fourier Transform Infrared Spectroscopy (FTIR)
2.4.2 Ultimate Tensile Strength (Ultimate tensile stress (UTS))
Chapter Three:
Methodology
3.1 Material Selection
3.1.2 Material pretreatment
3.2.2 Fabrication of Mold
3.2 Experimental Procedure
3.3 Testing
3.3.1 Fourier Transform infrared spectroscopy
3.3.2 Mechanical testing
Chapter Four:
Results and Discussion
4.1 FTIR Analysis
4.2 Mechanical Properties
4.1.1 Ultimate Tensile Strength
4.1.2 Elasticity Modulus
4.1.3 Elongation Percent
4.1.4 Tensile Stress and Strain
Chapter Five:
Conclusion and Recommendations
5.1 Conclusion
5.2 Recommendation
References
Appendices
The Title Page should be the first section of your project “Effect Of Thermal Treatment On Physical And Chemical Properties Of Recycled Polypropylene”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Effect Of Thermal Treatment On Physical And Chemical Properties Of Recycled Polypropylene by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Effect Of Thermal Treatment On Physical And Chemical Properties Of Recycled Polypropylene should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Effect Of Thermal Treatment On Physical And Chemical Properties Of Recycled Polypropylene research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Effect Of Thermal Treatment On Physical And Chemical Properties Of Recycled Polypropylene project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work