Overview Of A Microcontroller-Based Automatic Bell
ABSTRACT
The world over the decades has made considerable advancement in automation; automation is employed in homes, industries, commercial and educational sectors. In this work, a microcontroller-based automatic school bell is designed. This circuit uses a programmed microcontroller chip to schedule the school teaching and break periods so that for every start or end of a period a bell is automatically rang. This design finds a tremendous use at primary and secondary school levels where the teaching sections can span over eight periods including breaks. The advantage here is that the bell rings at the start of each period without any human intervention to a great degree of accuracy. The time schedule results are compared with that obtained with a clock, however, some drift is noticed, which is negligible.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 OBJECTIVE OF THE PROJECT
1.2 SIGNIFICANCE OF THE PROJECT
1.3 LIMITATION OF THE PROJECT
1.4 APPLICATION OF THE PROJECT
1.5 PROJECT ORGANIZATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF DOORBELL
2.2 HISTORICAL BACKGROUND OF THE PROJECT
CHAPTER THREE
3.0 CONSTRUCTION
3.1 SYSTEM BLOCK DIAGRAM
3.2 SYSTEM OPERATION
3.3 CIRCUIT DESCRIPTION
3.4 PROJECT CODE
3.5 DESCRIPTION OF COMPONENTS USED
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING OF SYSTEM OPERATION
4.4 COST ANALYSIS
CHAPTER FIVE
5.0 CONCLUSION
5.1 RECOMMENDATION
5.2 REFERENCES
CHAPTER ONE
1.1 INTRODUCTION
A bell is a percussion instrument used in schools that tells the students when it is time to go to class in the morning and when it is time to change classes during the day. Typically, the first bell tells the students that it is time to report to class. The bell is an important instrument in both primary and secondary schools and even in the industries and other businesses where the bell timer plays a critical role in running the day. Bells are also associated with clocks indicating the hour by ringing. Clock towers or bell towers can be heard over long distances which were especially important in the time when clocks were too expensive for widespread use. The bell shape is usually an open-ended hollow drum which resonates upon being struck.
Bells were known in China before 2000 BC and in Egypt, India, Greece, Rome, and other ancient cultures. From earliest times, they were used as signaling devices, as ritual objects, and as magical, often protective, amulets (often hung in doorways or around the necks of animals). The use of bells in churches spread through Europe from the 6th to 11th centuries and were first used in Eastern Christian
1.2 OBJECTIVE OF THE PROJECT
The objective of this electronic bell is to design a device that will provide a cheap and continent means of communication between two or more people in the same premises. In electric bell, the signal is transmitted by the call indicator system is to
1.3 SIGNIFICANCE OF THE PROJECT
Automatic bell Provide a cheap and continent means of communication between two or more people in the same premises. It can also be used in offices or industries as a mean alerting of someone.
An automatic bell system reduces the effort needed to turn on or off an electric bell manually that gives alarm for certain intervals of time based on timings. This automatic system is a microcontroller based project that uses a simple basic pic microcontroller, which makes this product affordable.
1.4 LIMITATION OF THE PROJECT
This project operates with power supply, which means that the system will stop working whenever mains power supply fails.
1.5 APPLICATION OF THE PROJECT
This device can be used in the following places, such as:
- church
- schools
- markets
- and any other public places to remind the public about a particular time
1.6 PROJECT WORK ORGANIZATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to electronics bell. In this chapter, the background, significance, objective limitation and problem of electronics bell box were discussed.
Chapter two is on literature review of an electronics bell. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
The Title Page should be the first section of your project “Overview Of A Microcontroller-Based Automatic Bell”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Overview Of A Microcontroller-Based Automatic Bell by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Overview Of A Microcontroller-Based Automatic Bell should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Overview Of A Microcontroller-Based Automatic Bell research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Overview Of A Microcontroller-Based Automatic Bell project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work