Measuring Power Quality Of A System
ABSTRACT
Electrical energy is a traded commodity that is becoming more important every day; there is increasing demand for continuous access to power (supply quality) and disturbance free power (power quality). Today’s power environments cover renewable energy production as well as continuously increasing electrical demand within the home and industrial sectors. This increases the requirement for continuous and reliable monitoring of the power consumed. Each disturbance that occurs reduces the quality of delivery and power and thereby gives an increased cost. Energy optimization covers both checks of energy volume as well as a connection to energy losses and their cause. Supplementing energy measurement with power quality measurement gives the information to display the cause of energy losses. Then a decision for the most cost efficient action can be made. power quality gives you the foundation to optimize your power and transmission network and make cost savings.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
DEFINITION OF TERMS
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- SCOPE OF THE PTOJECT
- BENEFIT OF MEASURING POWER QUALITY IN A SYSTEM
- CAUSES OF POWER QUALITY PROBLEM
- EFFECT OF POWER QUALITY PROBLEMS
- POWER QUALITY DISTURBANCES
CHAPTER TWO
LITERATURE REVIEW
2.0 LITERATURE REVIEW
2.1 OVERVIEW OF THE STUDY
2.2 NEED FOR COMPENSATION
2.3 TYPES OF COMPENSATION
2.4 OVERVIEW OF STATCOM AND ITS USES
2.5 APPLICATIONS OF STATCOMS
2.5 DETERMINING THE BEST FOUNDATION
CHAPTER THREE
DESIGN METHODOLOGY
3.1 METHODOLOGY
3.2 DESIGN OF STATCOM
3.3 MODELLING OF STATCOM
3.4 OPERATION OF STATCOM
CHAPTER FOUR
RESULT ANALYSIS
4.1 RESULT
4.2 POWER FACTOR COMPARISION
CHAPTER FIVE
5.0 CONCLUSION AND REFERENCES
- CONCLUSION
5.2 REFERENCES
CHAPTER
1.0 INTRODUCTION
The aim of the power system has always been to supply electrical energy to customers. Earlier the consumers of electrical energy were mere acceptors. Interruptions and other voltage disturbances were part of the deal. But today electric power is viewed as a product with certain characteristics which can be measured, predicted, guaranteed, improved etc. Moreover it has become an integral part of our life. So the quality of the power supply has gained much importance. The term ‘power quality’ emerged as a result of this new emphasis placed on the customer utility relationship. The fact that power quality has become an issue recently does not mean that it was not important in the past. Utilities all over the world have for decades worked on the improvement of what is now known as power quality. In the recent years, users of electric power have detected an increasing number of drawbacks caused by electric power quality variations. These variations already existed on the electrical system but only recently they are causing serious problems. This is due to the increased sensitivity of equipments and devices used by customers. These end user equipments are more interconnected in networks and industrial processes, that the impact of a problem with any piece of equipment is much more severe. Also power quality of power systems affects all connected electrical and electronic equipments and is a measure of deviations in voltage, current, frequency, temperature, force, and torque of particular supply systems and their components. To fulfill the demand of required supply, the world is under tremendous pressure for alternative sources of energy and has been inclined towards sustainable energy for future source of energy. The energy sources like solar energy, wind energy, hydroelectric power, tidal power, geothermal power and wave power are all important types of renewable energy. However if these energy sources are coupled with the energy efficacy it is termed as sustainable energy sources. Sustainable Energy is the provision of energy such that it meets the needs of the future without compromising the ability of future generations to meet their own needs. It is required to have more efficient means of converting and utilizing these energy. This will depend on the quality of power supplied and the impact of end user equipments on that power. But power electronic equipments are mostly used in sustainable and renewable energies in different stages for acquisition and conversion or inversion into useable form. Due to increasing sensitivity of the equipments and devices used by the customers, power qualities of sustainable energy are affected. Poor Power Quality results in high costs and that is gradually rising. The poorer the Power Quality, the more would be the initiatives required from concerned parties and regulating bodies to adopt corrective measures to ensure better Power Quality. As a consequence, the economy of a country is largely affected with even low tech industries suffering serious financial losses. Especially for successful sustainable energy programe, Power Quality Monitoring can help identify the cause of power system disturbances and the underlying problem conditions on a system before they cause interruptions and disturbances. Due to this many power utilities perform power quality monitoring as an essential service for their main customers. Essential capabilities of a power quality monitoring system are reduced cost and remote data transmission capability. With the electrical industry undergoing change, increased attention is being focused on reliability and power quality. Power providers and users alike are concerned about reliable power, whether the focus is on interruptions and disturbances or harmonic distortion or flicker. One of the most critical steps in ensuring reliability is monitoring power quality. Power quality monitoring can help to identify the cause of power system disturbances and even help to identify problem conditions before they cause interruptions or disturbances. Hence power quality monitoring is a multi-pronged approach to identifying, analyzing, and correcting power quality problems. To improve power quality with adequate solutions, it is necessary to know what kinds of disturbances occurred. A power quality monitoring system that is able to automatically detect, characterize and classify disturbances on electrical lines is therefore required. With power quality monitoring, power engineers can eliminate some of their troubleshooting headaches.
1.2 OBJECTIVE OF THE PROJECT
The objective of Power quality measurement is to supply power that is free of disturbance. Today, the greater part of all electrical equipment is built up of electronics that not only create disturbances on the power and transmission network but are also more sensitive to poorer power quality than traditional electrical apparatus.
Electrical disturbances occur at everything from planned to unplanned events on the power and transmission network. Examples of causes of power quality problems are; connections in the power and transmission network, connection and disconnection of electrical loads, lightning strikes, disturbing electrical apparatus (switched power supplies, frequency inverters, low energy light bulbs etc.), weak power and transmission networks and variable power production (renewable power production, wind power etc.)
1.3 SIGINIFICANCE OF THE STUDY
Power quality measurement is an essential service many utilities perform for their industrial and key customers. Because of the technology and software now available, this measurement is a highly-effective means to detect, solve, and even prevent problems on both utility and customer power systems. Not only can a monitoring system provide information about system disturbances and their possible causes, it can also detect problem conditions throughout the system before they cause customer complaints, equipment malfunctions, and even equipment damage or failure. Power quality problems are not necessarily limited to the utility side of the system – indeed, surveys have shown that the majority of power quality problems are localized within customer facilities. Given this, power quality measurement is not only an effective customer service strategy, but also a way to protect a utility’s reputation for quality power and service. In an industry facing increased competition, this reputation can be the difference between keeping and losing key accounts.
1.4 PURPOSE OF THE STUDY
Electrical energy is a traded commodity that is becoming more important every day; there is increasing demand for continuous access to power (supply quality) and disturbance free power (power quality). Today’s power environments cover renewable energy production as well as continuously increasing electrical demand within the home and industrial sectors. This increases the requirement for continuous and reliable monitoring of the power consumed. Each disturbance that occurs reduces the quality of delivery and power and thereby gives an increased cost. Energy optimization covers both checks of energy volume as well as a connection to energy losses and their cause. Power quality measurement gives the information to display the cause of energy losses. Then a decision for the most cost efficient action can be made. Measuring power quality gives you the foundation to optimize your power and transmission network and make cost savings.
1.5 BENEFIT OF MEASURING POWER QUALITY IN A SYSTEM
Benefits of a power quality measurement are:
- Assist in preventive and predictive maintenance
- Identify source and frequency of events
- Establish precise location and timing of events
- Develop maintenance schedules based on power quality trends
- Determine the need for mitigation equipment
- Monitor and trend conditions
- Analyze harmonics, voltage sag, power factor correction
- Make decisions based on documented trends
- Ensure equipment performance
- UPS and backup systems
- Power quality mitigation
- Assess sensitivity of process equipment to disturbances
- Evaluate performance against specifications
- Compare current and voltage
- Benchmark overall system performance
- Make multi-site comparisons
- Energy rate comparisons
- Improve energy rates
- Identify load versus demand
- Conduct energy curtailment analysis
- Evaluate alternative rate structures
1.6 CAUSES OF POWER QUALITY PROBLEMS
The causes of power quality problems can be many. It is often difficult to point an exact cause for a specific problem. Power quality measuring equipments comes to aid in such situations. Most of the causes of power quality problem can be divided into two categories:
Internal: This cause approximately 80% of electrical problems originate within a business facility. Potential culprits may include large equipments start or shut down, improper wiring and grounding, overloaded circuits or harmonics.
External: This cause about 20% of power quality problems originate with the utility transmission and distribution system .The most common cause is a lightning strike; other possibilities include equipments failure, vehicle accidents, weather conditions, neighboring business and even normal operation of utility equipments.
1.7 POWER QUALITY DISTURBANCES
Power quality is concerned with the deviation of the voltage from the ideal waveform or the deviation of the current from the ideal waveform. Such a deviation is called a power quality phenomena or disturbances. It is important to first understand the kinds of power quality disturbances that can cause problems with the sensitive loads. Categories of these disturbances must be developed with a consistent set of definitions, so that the measurement equipments can be designed in a consistent manner. Power quality phenomena can be divided into two basis categories. Steady state variations A characteristic of voltage or current is never exactly equal to its nominal or desired value. The small deviations from the desired value are called voltage or current variations. A property of any variation is that it has value at any moment in time. Monitoring of variations thus has to take place continuously. Events Occasionally, the voltage or current deviates significantly from the nominal or ideal wave shape. These sudden deviations are called events. Monitoring of events take place by using a triggering mechanism where recording of voltage or current starts the moment, a threshold is exceeded.
The Title Page should be the first section of your project “Measuring Power Quality Of A System”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Measuring Power Quality Of A System by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Measuring Power Quality Of A System should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Measuring Power Quality Of A System research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Measuring Power Quality Of A System project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work