Design And Wireless Of A Panic Alarm System
ABSTRACT
Wireless panic alarm system is a full proof method to secure a building. The panic alarm system consists of panic alarm buttons and sirens. These panic buttons located at rather, strategic locations inside building premises. Moreover, high volume siren receivers spread across the building. While there is an event of an emergency, a person can alert the security personnel by mere pressing of a button. The panic siren system also has provision for handheld remote control units. Therefore, on press of remote controller, the building staff gets alerted. Then, respective panic button point shows up on the receiver console. It is possible to have more than one receiver consoles for the staff to know the panic point. Moreover, there is no limitation to the range of communication. And finally, boosters can help enhancing the signals kept at intermediate locations.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- PURPOSE OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- LIMITATION OF THE PROJECT
- ADVANTAGES OF THE PROJECT
- PROBLEM OF THE PROJECT
- APPLICATION OF THE PROJECT
- RESEARCH QUESTION
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- OVERVIEW OF THE STUDY
- REVIEW OF THE RELATED STUDY
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BASIC OF THE SYSTEM
3.2 BLOCK DIAGRAM OF THE SYSTEM
3.3 SYSTEM OPERATION
3.4 CIRCUIT DIAGRAM
3.5 CIRCUIT DESCRIPTION
3.6 DESCRIPTION OF COMPONENTS USED
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
4.0 TESTING AND RESULTS
- CONSTRUCTION PROCEDURE AND TESTING
- INSTALLATION OF THE COMPLET DESIGN
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
- COST ANALYSIS
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
Advantages
- No wiring
- Installation not needed
- Maintenance free devices
- Moreover, units are modular
- Works on wireless technology
- Scalable system
- High noise level sirens
- Wall mount and handheld panic buttons
- No limitation to the range of communication
Applications
- Alarm system for old age homes
- Women safety in hostels and buildings
- Office emergency alarm systems
- Building panic alarm buttons
- Residential and gated community alarms
- Sirens in yards and factories
- Wireless alert in schools and colleges
Panic alarm button
100 meters range
Each panic button, needs to mount at strategic locations inside a building. However, in a situation of emergency or panic, a person needs to press the nearby alarm button. As a result, the whole building and security will get an alert, with various sirens and alarms. Thus, it gives a sense of security and satisfaction in the mind of residents. Moreover, system runs on wireless technology. Therefore, it becomes possible to have many panic buttons without wiring. The signal range is 20-30 meters indoors and rather 100-120m outdoors.
The Title Page should be the first section of your project “Design And Wireless Of A Panic Alarm System”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Design And Wireless Of A Panic Alarm System by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Design And Wireless Of A Panic Alarm System should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Design And Wireless Of A Panic Alarm System research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Design And Wireless Of A Panic Alarm System project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work