Design And Construction Of Traffic Light
This project traffic light is design for the safety ness of vehicles our the road. It is a very destroy loop and sensor that which coordinate the system when the driver encounter long sharing of green light. The traffic light is consist of two more chamber or circuit red and green or amber/yellow which the red high gives the sign of stop the green is for free movement on the that is a junction or about.
INTRODUCTION
Traffic light for vehicles or pedestrians normally have two main lights a red light that means stop and a green (or sometime while for pedestrian) light that means go or more correctly proceed with caution the use of these lower are thought to originate from nautical right of way. Usually the red light contains some orange in its have and the green light contains some blue to provide some support for people with red green colour blindness.
Traffic a light is just the way of controls the movement of vehicles on the road mostly at a junction or round about where there is combination of several rood meeting at particular point. In most areas or junction it flash grew in most countries there a yellow light which when on by itself and not flashing means stop if able to do so safety. In some system a flashing yellow means that a motorist may go a head with care if the road is clear giving way to pedestrians and to other road vehicles that may have priority. A flashing red is treated as a regular stop sign but it also work with the help of 555 timer 1c which is being set or timed at a particular time interval for its to reset and operate by itself.
TURNING SIGNAL AND RULES
In some instances traffic may turn after stopping on red right in right driving countries left in left driving countries too provided they yield to the pedestrians and other vehicles. In some cases which generally allow this a sign next to the traffic light indicates that it is allowed of a particular inter section. Conversely jurisdictions which generally allow this might forbid it at a particular inter section with a no turn on red sign or might put green arrow to indicate specifically when a right turns allowed without having to yield to pedestrians (this is usually when traffic from the perpendicular street making a left turn on to one’s street and this no pedestrians are allowed in the inter section anyway. Some jurisdictions allow turning on red in the opposite direction (left in right courtiers right in left driving countries) from one way road onto another way road some of these even allow these turns form two way road on to one way road. In some cases where drivers are allowing to proceed straight on red after stopping at specially posted T intersection where the increasing road went only left was dangerous.
Title Page
Certification
Approval Page
Acknowledgement
Dedication
Abstract
Chapter One
1.0 Introduction
1.1 Turning Signal And Rules
Chapter Two
2.0 Description Of The System
2.1 Illustration Of The Circuit Diagram
2.2 Description And Configuration Of 55 Time Ic
Chapter Three
3.0 Pin Connection Of 555 1cand
3.1 Description Of Their Component
3.2 Description Of Outer Component
3.3 Capacitor
Chapter Four
4.0 Identification Of Component Using Symbol
Chapter Five
5.0 Pedestrian Scrambles
Chapter Six
6.0 Component Sourcing
Chapter Seven
7.0 Control And Coordination
7.1 Fixed Control
7.2 Dynamic Control
7.3 Coordinated Control
Chapter Eight
8.0 Lane Control
Chapter Nine
9.0 Packaging
Chapter Ten
10.1 Conclusion
References
The Title Page should be the first section of your project “Design And Construction Of Traffic Light”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Design And Construction Of Traffic Light by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Design And Construction Of Traffic Light should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Design And Construction Of Traffic Light research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Design And Construction Of Traffic Light project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work