Design And Construction Of Numeric Controlled Door Locking System
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my — for his financial support and moral care towards me.Also to my mentor — for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my — and other people. My immensely appreciation goes to my humble and able supervisor Mr. — for his kindness in supervising this project. My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. —, and Dr. —. I also recognize the support of some of the staff of — among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. — and the —. Finally, my appreciation goes to my elder sister —, my lovely friends mercy —, —, — and many others who were quite helpful.
ABSTRACT
This project is titled design and construction of numeric keypad lock. It is design to meet up with the security demand of properties against theft.
Numeric keypad lock is an electronic locking device which operates by means of electric current. Electric locks are sometimes stand-alone with an electronic control assembly mounted directly to the lock. More often electric locks are connected to an access control system. The advantages of an electric lock connected to an access control system include: key control, where keys can be added and removed without re-keying the lock cylinder; fine access control, where time and place are factors; and transaction logging, where activity is recorded.
Perhaps the most prevalent form of electronic lock is that using a numerical code for authentication; the correct code must be entered in order for the lock to deactivate. Such locks typically provide a keypad, and some feature an audible response to each press. Combination lengths are usually between 4 and 6 digits long.
Numeric keypad lock is designed to activate or open a circuit a system when the right code is entered and to remain dormant when the wrong code is pressed once or two times, but when it is pressed for the third time it beeps indicating an unauthorized user. The system makes use of 12V supply and NAND-gate integrated circuits.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- BACKGROUND OF THE PROJECT
- BACKGROUND OF THE PROJECT
- AIM AND OBJECTIVE OF THE PROJECT
- ADVANTAGES OF NUMERIC DOOR LOCK SYSTEM
- APPLICATIONS OF THE PROJECT
- LIMITATION OF THE PROJECT
- DEFINITION OF TERMS
- PROJECT WORK ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 HISTORICAL BACKGROUND OF HOME SECURITY
2.2 REVIEW OF DOOR SECURITY
2.3 REVIEW OF DOOR SECURITY DEVICES
2.4 REVIEW OF DIGITAL KEYPAD DOOR ENTRY
2.5 REVIEW OF RELATED STUDIES
2.6 REVIEW ON LOCKS
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 PRINCIPLE OF OPERATION
3.2 CIRCUIT DIAGRAM
3.3 CIRCUIT DESIGN
3.4 CIRCUIT DESCRIPTION
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING AND RESULT OF SYSTEM
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Traditional lock systems using mechanical lock and key mechanism are being replaced by new advanced techniques of locking system. These techniques are an integration of mechanical and electronic devices and highly intelligent. One of the prominent features of these innovative lock systems is their simplicity and high efficiency. Such an automatic lock system consists of electronic control assembly which controls the output load through a password. This output load can be a motor or a lamp or any other mechanical/electrical load. Here we develop an electronic code lock system using 4081 IC, which provides control to the actuating the load. It is a system with input from the keyboard and the output being actuated accordingly. This system demonstrates a password based door lock system wherein once the correct code or password is entered, the door is opened and the concerned person is allowed access to the secured area. Again if another person arrives it will ask to enter the password. If the password is wrong then door would remain closed, denying the access to the person.
1.2 PROBLEM STATEMENT
One could attest to the fact that the metallic keys used to access mechanical door locks are very susceptible to getting lost, which would mean breaking the locks over and over again if there are more occurrences of such scenarios, moreover, such access keys can be duplicated by unauthorized users.
Using an electronic door lock as said earlier would counteract the damning consequences of such repugnant occurrences. This study came to overcome these challenges by using a password / numerals instead of traditional lock.
1.3 AIM AND OBJECTIVE OF THE PROJECT
The main aim of this work is to design a security door device that can be used to control a door when the right password is pressed using a keypad. The objectives are to:
- Eliminate the use of mechanical/metallic keys
- Prevent events of key
- Avoid excessive key duplication for everyone in the
- Make the apartment where it is installed more difficult to break
1.4 ADVANTAGES OF NUMERIC DOOR LOCK SYSTEM
- This project provides security
- Power consumption is less
- Used commonly available components
- Project is simple and easy
1.5 APPLICATIONS OF THE PROJECT
- This simple circuit can be used at residential places to ensure better safety.
- It can be used at organizations to ensure authorized access to highly secured places.
- With a slight modification this Project can be used to control the switching of loads through password.
1.6 LIMITATION OF THE PROJECT
Limitations of numeric Door Lock System are:
- It is a low range circuit, i.e. it is not possible to operate the circuit remotely.
- If you forget the password it is not possible to open the door.
1.7 DEFINITION OF TERMS
Secure Area: A designated area in which access into and out of is controlled and can be monitored.
Secure Door: A door in which access through is controlled and can be monitored.
Shielding: Providing electrical isolation for a circuit, component, or wire by enclosing or isolating the circuit, component, or wire with a metal enclosure, plate, or foil that blocks any interfering electrical field.
Short Circuit: An unintentional connection that provides a low resistance path between two points in a circuit or between a point in a circuit and ground. A Short Circuit can drastically affect the operation of a circuit. If excessive current flow results from the Short Circuit, a device may be damaged or ruined.
Spike: A voltage peak of high amplitude and short duration.
Suppression: The addition of a device to an electrical circuit that minimizes or prevents transients from affecting the proper operation of that circuit.
Switch: A device used to either connect or interrupt an electronic circuit.
1.8 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to the study. In this chapter, the background, significance, objective limitation and problem of system were discussed.
Chapter two is on literature review of the study. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
PROJECT DESCRIPTION
Format = Microsoft word
Chapters = 1-5 chapters
Price: N3,000.
For more information contact us through any of the following means:
Mobile No: +2348146561114 or +2347015391124
Email address: engr4project@gmail.com
Whatsapp No: +2348146561114
The Title Page should be the first section of your project “Design And Construction Of Numeric Controlled Door Locking System”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Design And Construction Of Numeric Controlled Door Locking System by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Design And Construction Of Numeric Controlled Door Locking System should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Design And Construction Of Numeric Controlled Door Locking System research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Design And Construction Of Numeric Controlled Door Locking System project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work