Design And Construction Of An Automatic Parking Light In A Car
ABSTRACT
This project work is on design and construction of an automatic parking light in a car. Parking lights are automotive lamps designed to increase the visibility of a car in a variety of situations. Although most nations no longer require the use of these lights, they can be extremely useful. Almost all cars are fitted with them, although they are often linked with the headlights. Formerly, parking lights were run on a different electrical system, and were intended for use when cars were parked along narrow, poorly lit roads, to alert oncoming drivers to the presence of the parked car. In some regions of the world, they still serve this function.
However, an automatic parking light in a car is designed to turn on the parking lights automatically for 30 seconds when an approaching vehicle’s light is detected from the rear or front side. This automatic feature provides safety at night for a parked vehicle.
The aim of this work is to design and construct an automatic parking light in a car that lights automatically for 30seconds when an approaching vehicle’s light is detected from the rear or front side.
TABLE OF CONTENTS
CHAPTER ONE
1.0 INTRODUCTION
Parking lights are automotive lamps designed to increase the visibility of a car in a variety of situations. Although most nations no longer require the use of these lights, they can be extremely useful. Almost all cars are fitted with them, although they are often linked with the headlights. Formerly, parking lights were run on a different electrical system, and were intended for use when cars were parked along narrow, poorly lit roads, to alert oncoming drivers to the presence of the parked car. In some regions of the world, they still serve this function.
However, an automatic parking light in a car is designed to turn on the parking lights automatically for 30 seconds when an approaching vehicle’s light is detected from the rear or front side. This automatic feature provides safety at night for a parked vehicle.
Except in the United States, parking lights must have clear lenses so that they emit white light. The white light is highly visible, even in poor conditions, although it is not as bright as the headlights, as the lamps and surface area covered by the lens are smaller. In the United States, such lights are frequently produced with amber lenses, to help distinguish them from red brake lights and white headlights.
Typically, a car has parking lights located on either side of the front of the car, on the outside of the headlights. They may also appear in the rear, or along the side of the vehicle to further increase visibility. In a car where these lights are separated from headlights, allowing drivers to use one or both sets, they are usually linked to the switch used for headlights, which is turned once for parking and twice for headlights.
Although parking lights are sometimes referred to as running lights, they are not always the same. Drivers should be aware that, in most regions, it is illegal to drive at night with just the parking lights on although this practice used to be allowed in some cities. In most US states, it is illegal to drive with just the parking lights on whether in the day or night. Leaving running lights on during the day is perfectly legal, however, and is often encouraged. Drivers should consult the the appropriate regulatory body to be sure of the rules that affect them.
In addition to increasing visibility and alerting other drivers to the presence of a car, parking lights can also be useful in emergencies. In some cities where it is permitted, drivers use them to drive at night in well light areas, to help reduce light pollution. In addition, should a headlight go out while driving, the lights, which are typically on with the headlights in most car designs, can help to compensate and make other drivers aware that the approaching vehicle is a car with one headlight, not a motorcycle.
1.2 SIGNIFICANCE OF THE STUDY
Since 1968, parking lights have been produced on the same wiring system as headlights and used concurrently with them as an additional means of illuminating a vehicle automatically, to make cars more visible from the side.
1.3 PURPOSE OF THE STUDY
Their main purpose is to design a system that will turn on the parking lights automatically for 30 seconds when an approaching vehicle’s light is detected from the rear or front side
1.4 TYPES OF PARKING LIGHT OF A CAR
In the United States, parking lights are typically orange or gold in color to distinguish them from red break lights and white headlights. In other parts of the world, parking lights are typically bright, clear lights.
1.4 BENEFITS OF THE STUDY
Parking lights serve a useful purpose as a backup light in emergencies. If a headlight burns out, the parking light will still shed some light on that side of the car. Additionally, in such a situation, the glow that the parking lights create around the car makes it more obvious that the vehicle is an automobile and not a motorcycle or other vehicle with only one standard headlight.
The Title Page should be the first section of your project “Design And Construction Of An Automatic Parking Light In A Car”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Design And Construction Of An Automatic Parking Light In A Car by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Design And Construction Of An Automatic Parking Light In A Car should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Design And Construction Of An Automatic Parking Light In A Car research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Design And Construction Of An Automatic Parking Light In A Car project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work