Design And Construction Of An Audio Controlled Running Light
This mains operated audio controlled running light can be used in discotheques. The lamps glow in running sequence as per the sound of music. Of the ten AC lamps, only one lamp permanently glows if there is no sound. When music is played, light starts ‘running’ through the lamps. The condenser mic converts audio signals into electric signals. Transistor T1 amplifies the microphone signals, which provide clock pulses to decade counter IC CD4017 (IC1). Preset VR1 is used to vary the signal level. The Q9 output provides reset signal to pin 15 of IC1. Divided-by-10 signals are fed to clock pin 14 of IC2, which is another decade counter. The outputs of IC2 drive transistors to provide triggering pulses to triacs. Triacs, in turn, drive the AC lamps.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- PURPOSE OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- LIMITATION OF THE PROJECT
- ADVANTAGES OF THE PROJECT
- PROBLEM OF THE PROJECT
- APPLICATION OF THE PROJECT
- RESEARCH QUESTION
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- OVERVIEW OF THE STUDY
- REVIEW OF THE RELATED STUDY
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BASIC OF THE SYSTEM
3.2 BLOCK DIAGRAM OF THE SYSTEM
3.3 SYSTEM OPERATION
3.4 CIRCUIT DIAGRAM
3.5 CIRCUIT DESCRIPTION
3.6 DESCRIPTION OF COMPONENTS USED
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
4.0 TESTING AND RESULTS
- CONSTRUCTION PROCEDURE AND TESTING
- INSTALLATION OF THE COMPLET DESIGN
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
- COST ANALYSIS
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
KEYWORD: audio controlled running light, sound controlled lights circuit, electronic circuits projects diagrams free, interesting electronic circuits, electronic circuit diagram, sound to light controller kit, music rhythm led flash light using microphone pdf, applications of music operated dancing leds, transistor projects
Audio Controlled Running Light Circuit
Fig. 1: Circuit for audio controlled running light
Fig. 1 shows the circuit for the audio controlled running light, while Fig. 2 shows the pin configuration of triac BT136.
The condenser mic converts audio signals into electric signals. Transistor T1 amplifies the microphone signals, which provide clock pulses to decade counter IC CD4017 (IC1). Preset VR1 is used to vary the signal level. The Q9 output provides reset signal to pin 15 of IC1. Divided-by-10 signals are fed to clock pin 14 of IC2, which is another decade counter. The outputs of IC2 drive transistors to provide triggering pulses to triacs. Triacs, in turn, drive the AC lamps. You can now see the lights running with the sound of the music.
Fig. 2: Pin configuration of triac BT136
Frequency-divider ICs CD4017 have been used here to reduce the audio to a noticeably low frequency. AC mains is rectified by diode D11, regulated by zener diode ZD1 and filtered by capacitor C4 to power the circuit.
The Title Page should be the first section of your project “Design And Construction Of An Audio Controlled Running Light”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Design And Construction Of An Audio Controlled Running Light by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Design And Construction Of An Audio Controlled Running Light should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Design And Construction Of An Audio Controlled Running Light research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Design And Construction Of An Audio Controlled Running Light project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work