Design And Construction Of A Clock Tick-Tock Sound Generator And Led Pendulum
Wooden-case, battery-operated wall clocks with pendulums are available in the market. Some even have chimes. What is missing is the tick-tock sound of old mechanical pendulum clocks. This work is on a tick-tock sound generator. It is built around timer IC 7555 (IC1) wired as an astable multivibrator. Resistor R1, preset VR1 and capacitor C1 generate frequencies that can be varied with the help of preset VR1. At output pin 3 of IC1, a small speaker is connected via capacitor C3 that produces the tick-tock sound.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- PURPOSE OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- LIMITATION OF THE PROJECT
- ADVANTAGES OF THE PROJECT
- PROBLEM OF THE PROJECT
- APPLICATION OF THE PROJECT
- RESEARCH QUESTION
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- OVERVIEW OF THE STUDY
- REVIEW OF THE RELATED STUDY
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BASIC OF THE SYSTEM
3.2 BLOCK DIAGRAM OF THE SYSTEM
3.3 SYSTEM OPERATION
3.4 CIRCUIT DIAGRAM
3.5 CIRCUIT DESCRIPTION
3.6 DESCRIPTION OF COMPONENTS USED
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
4.0 TESTING AND RESULTS
- CONSTRUCTION PROCEDURE AND TESTING
- INSTALLATION OF THE COMPLET DESIGN
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
- COST ANALYSIS
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
Keyword: clock tick-tock sound generator and led pendulum, electronic circuits projects diagrams free, 555 and 4017 circuits, 4017 ic projects, mini project using ic, 555 timer projects, circuit today 555 timer, cd4017 vu meter, alarm circuit using timer 555.
Tick-tock sound generator circuit
Circuit of tick-tock sound generator Wooden clock design
Shown above is the circuit of a tick-tock sound generator. It is built around timer IC 7555 (IC1) wired as an astable multivibrator. Resistor R1, preset VR1 and capacitor C1 generate frequencies that can be varied with the help of preset VR1. At output pin 3 of IC1, a small speaker is connected via capacitor C3 that produces the tick-tock sound. At pin 3 of IC1, two yellow LEDs are also connected on the clock face to flash in time with sound (see Fig. 2). Adjust preset VR1 such that ticking sound closely resembles the tick-tock of old pendulum clocks. Yellow LEDs (LED1 and LED2) match well with the wooden clock.
LED pendulum circuit
Shown below is the circuit for the LED pendulum. It uses another timer 7555 wired in astable mode and its clock pulse at pin 3 is fed to clock pin 14 of decade counter 4017 (IC3). The outputs of IC3 are connected with the help of switching diode 1N4148 such that the six LEDs (LED3 through LED8) flash in sequence in one direction first and then in reverse sequence. The speed of flashing of LEDs can be adjusted with the help of 10-kilo-ohm preset VR2. Capacitor C6 (6.8nF) and resistor R11 (100-kilo-ohm) are used to reset the decade counter.
Circuit for LED pendulum
Construction & testing
Assemble the circuit on a general-purpose PCB and enclose in a suitable cabinet. Mount the LEDs either in ‘V’ shape or ‘U’ shape on the front panel of the cabinet (as shown in Fig. 4).
The Title Page should be the first section of your project “Design And Construction Of A Clock Tick-Tock Sound Generator And Led Pendulum”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Design And Construction Of A Clock Tick-Tock Sound Generator And Led Pendulum by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Design And Construction Of A Clock Tick-Tock Sound Generator And Led Pendulum should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Design And Construction Of A Clock Tick-Tock Sound Generator And Led Pendulum research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Design And Construction Of A Clock Tick-Tock Sound Generator And Led Pendulum project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work