Design And Construction Of A 3 Way Inter Communication System
An intercommunication system is nothing but the communication between two or more persons not close to one another. This does not mean we should categorize telephones, fax, teleprinters, telegraphs etc. an example of intercom system sine they are used in communication between people. Infact, intercom involves short distance places. It is limited in electronics, offices, and hospitals.
The intercom system under is a three way station type. This means that a person can communicate to the other at another station at his own convenient time. They call once another attention by the use of the tone generated by the use of tone generator.
Depress a button and the tone sounds, and the same switch is thrown to the intercom circuit thus they communicate.
This system to be used in solving the problem of poor communication in our department. Besides, it can be extended to some other offices by the addition this one may use a rotary switch
1.0 INTRODUCTION
Electronic inter communication is the process of exchanging information between individuals over relatively long distance by the use of electronic system connected together by communication cables or the instrument cable or satellite links. A telephone system and an intercom system can be used to achieve intercommunication.
In the department of Electrical/Electronics Engineering, Institute of Management and Technology, Enugu, there exists the need for intercommunication between all the offices in the department so as to enable the smooth running of activities. Where by information and ideas are exchanged between the individuals concerned just at the press of a button. To achieve this kind of situation and economical means of electronic communication was considered.
Thus the intercom system was chosen so as interconnect the three offices earlier specified. Other offices can also be attached/ connected to the system as time goes on since thee is room for modification. One may ask why the telephone system not considered since it is also another system of intercommunication. The telephone system is equally better but less appropriate since it requires a dedicated line form NITEL who charges bills accordingly. The intercom system only makes use of the physical communication cables interlinking the handsets concerned. Also, the telephone system requires PABX system (Private Automatic Box Exchange) for effective communication between the concerned telephone sets. The PABX is a high capacity telephone switching equipment that automatically connects a call to the desired route or extension number. It equally handles both external call and internal call. The telephone set or system is more appropriate for a whole educational complex or
company. It is not appropriate to use the telephone for the connectivity of few offices as this under-utilizes the capacity of the PABX since they are designed to handle high capacity of lines. Bearing cost in mind, the 3-way intercom units is cheaper to construct when compared to the cost of procuring PABX system talkless of design and construction.
By embarking on the 3-way intercom, this believed that an efficient communication gadget or communication link between the offices shall be achieved.
Title Page
Certification
Dedication
Acknowledgement
Abstract
Table Of Contents
Chapter One
1.0 Introduction
Chapter Two
2.0 Complete Circuit Description
2.1 Simplified Block Diagram Of Thee 3-Way Intercom System
2.2 Operation Principles
Chapter Three
3.0 Icc1212c
3.1 Resistor
3.2 Capacitor
3.3 Condenser Microphone
3.4 Loudspeakers
3.5 Switches
3.6 Communication Cables
Chapter Four
4.0 Circuitry Design And Description
4.1 Description Of Power Supply Unit Circuit
4.2 Description Of The Tone Generator Circuit
4.3 Circuit Diagram Of The Three Units And Explanation
4.4 Explanation Of The Switching Circuit
Chapter Five
5.0 Construction And Packaging
5.01 Component Sourcing
5.1 Construction And Testing
5.2 Audio Amplifying Stage
5.3 Prototype
5.4 Trouble Shooting
5.5 Packaging
Chapter Six
6.0 Conclusion
6.1 Further Study And Design
Reference
Appendix
The Title Page should be the first section of your project “Design And Construction Of A 3 Way Inter Communication System”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Design And Construction Of A 3 Way Inter Communication System by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Design And Construction Of A 3 Way Inter Communication System should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Design And Construction Of A 3 Way Inter Communication System research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Design And Construction Of A 3 Way Inter Communication System project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work