Construction of Water Storage Tank (2000 litters)
The 20000 liters storage tank was constructed for effective storage and conservation of third with three (3) mild steel sheet of 14 gauge (2mm) thickness.
The construction started by marketing out 1½ (One and half) mild steel of 2440 Mm by 113Mmusing metal meter rule and critter the already market out dimension underwent cutting with a backsaw and after marking out and cutting operation of the cylindrical part it under went fording, using hammer and folding machine, and finally joined together using Arc welding machine.
Therefore, the cylindrical part of the storage tank was formed. To form the bottom , half of the remaining sheet, that was used initially for the cylindrical part was used, having a dimension of 1220 MM by 1130MM The top of the tank has a doomed sphere, roof of 1220MM for the entering of water and it was coursed with the constructed culver of 40000 MM by 10000 MM using one mild steel sheet the storage tank socket and tap was designed and constructed using drilling machine to make a small opening at the bottom of the tank with a diameter of 2.5MM and the inner threaded socket pipe of diameter 30Mmby 60 MM was screwed and welded to the opening.
The complete are welding of the parts was done with 12 gauge 2.5 MM electrode with exit piping of all the necessary joints. The storage tank was designed for affective storage and transfer of water through the tap control. It was discovered that the flow rate of the water through the tap control was free of any obstruction therefore, the tap can allow easy water flow out from the tank and can be used ford for storage of any water such as kerosene diesel, petrol etc. The construction was achieved this water was filled into function effectively.
INTRODUCTION
Reservoirs are forms of storages vessels.
Reservoirs are used for different purposes ranging from use in the chemical industries to use in the domestic homes of different chemical and physical properties others are used for the storage of solids and semi-finished items.
They are reservoirs that are designed in the form of silos for the storage of Agricultural equipments and even industries products.
Some reservoirs are sued in the cryogenic storages. Storage containers that are used for storing cryogenic substances are designed 10 percent volume larger than the substance so as to reduce rapid build up of pressure in the container.
The major problems of most reservoirs are leakage. Leakage usually results when controlled resulting to the collapse of a section. It might equally result from the rushing of a part of the container.
1.1 SCOPE OF THE PROJECT
The scope of the project is the design of a 2.0m3 reservoir for holding water with the following requirements;
i. Ability to withstand corrosion
ii. Cost should be comparable to what is obtainable in the open market
iii. With the capacity to be used for hygienic water storage
iv. Should not be constructed of a material that can easily breakdown on any impact of stress or be subjected to easy leakage of water
v. Should be installed on a support after construction.
Title Page
Letter Of Transmittal
Dedication
Acknowledgement
Approval Page
Abstract
CHAPTER ONE
1.0 Introduction 1
1.1 Scope Of The Project 2
CHAPTER TWO
2.0 Types Of Reservoirs 3
2.1 Industrial And Domestic Use Of Reservoir 4
2.2 Materials Of Construction For Different Types Of Reservoirs 5
2.3 Design Factors For Construction 6
CHAPTER THREE
3.0 Procedure For Construction Of 500 Gallons 2250 Liters 8
3.1 Installation Procedure For The Tank 15
3.2 Cost Estimate/Evaluation 15
CHAPTER FOUR
4.0 Recommendations 17
Conclusion 17
References
The Title Page should be the first section of your project “Construction of Water Storage Tank (2000 litters)”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Construction of Water Storage Tank (2000 litters) by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Construction of Water Storage Tank (2000 litters) should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Construction of Water Storage Tank (2000 litters) research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Construction of Water Storage Tank (2000 litters) project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work