Production Of Starch From Cassava
The fresh cassava were sources from Idodo in Nkanu Local Government of Enugu state. The weight of the cassava tuber were taken to be 31.50kg. After peeling and washing, it was divided into two equal parts which was 21.13kg for production of sample A and sample B respectively (edible and textile starch) which weighed 13.1kg.
During this process, the temperature were obtained at 700c (617.4R). And the other properties of the cassava samples were carried out, such as moisture content of the fresh cassava 59.82% (Sample A), Textile starch 52.02% (Sample B) and edible starch (Sample C). the average mean percent of ash content of Sample A, edible starch was 2.6% while that of (Sample B, fresh crush cassava was 2.1%.
Also determination of cyanide content of fresh cassava 14.13ml. Textile 5.0ml and edible starch 4.48ml.
INTRODUCTION
Cassava was known to the world before the discovery of America. The Portuguese settlers found the native Indian’s in Brazil growing the cassava plant and Pierre Marty wrote in 1490 that the poisonous roots of a “Yucca” were used in the preparation of bread. Cassava were introduced to the Westerner const of Africa in the sixteenth centuries while the word topioca derived from tapioca. The tipi Indian’s name the liquid which is extracted from the tubers and made into pellets called tipicoet. The edible tubers, which serves as food in many tropical countries as well as source of starch, it also serves as principal food for workers in minning and industrial centers in most countries too.
Cassava is a single species, manihot esculent crante (synonymous with mainhot utilissmapolhe) it is a tuberous dicotyledous plant, belonging to the botanical family of Euphorbiacca, and like most other members of that family. The cassava plant contain latifiers and produces latex. The cassava tuber contains and mainly water and carbohydrate with waters having a greater proportion and a small significant amount of cyanogenic glucoside (prussic acid) of all the constituents of cassava tubers. Two major factors limits its utilization. In the form of the fresh (unprocessed) tuber. The first is that the unprocessed tuber has relatively high amount of prussic acid, which is highly poisonous to human and animal when consumed. The second factor is that fresh cassava tubers cannot be stored more than a few days after harvest. The tuber begins to deteriorate rapidly as a result of enzymatic process in the presence of water contained in the tuber.
It is an important food crop in tropical countries such as Brazil, Nigeria, Indonesia and Thailand. The roots of the cassava are rich in starch and are consumed as human food or animal feed. Small amount of it’s root are converted into industrial products. Today Thailand are the world leaders of starch production from cassava.
TABLE 1
BELOW IS RECENT WORLD PRODUCTION OF CASSAVA NOT IN THE YEAR
Country Volume (million)
Nigeria 33,854,000
Brazil 24,481,356
Thailand 18,283,000
Congo 15,959,000
Indonesia 15,800.00
Ghana 7,845,440
Tanzania 5,757,968
India 5,800,00
Mozambique 5,361,974
China 3,700,900
Others 175,617,389
SOURCE: FAD STA, 2001
SCOPE AND OBJECTIVE
The objective of this project is based on the production of starch from cassava, using a manual instrument called greater to open all the tuber cell. So that the starch granules are easily released and extracted through hydraulic press, or sieve (mesh). However it has been observed that cassava flour produced through different process have different quanlities.
SCOPE
The following analysis were carried out cyanide content, production of Edible and textile starch, Ash content of edible and fresh crushed cassava, moisture content of fresh crushed cassava, textile starch and edible starch. At the end of the work, the result of these analysis were shown.
Title page
Abstract
Table of content
CHAPTER ONE
1.0 Introduction
1.1 Scope and objective
CHAPTER TWO
2.1 History of cassava
2.2 Environmental condition for cassava growth
2.3 Cultural method of cultivation/harvesting
2.4 Harvesting/storage
2.5 Nutritive composition of cassava
2.6 Method of cassava processing
2.7 Toxicity of cassava processing and it’s material
2.8 Starch chemistry
2.9 Physical properties of starch
2.9.1 Chemical properties of starch
2.9.2 Starch processing
2.9.3 Hydrolysis of local starch
CHAPTER THREE
3.0 Production of starch from cassava (textile starch)
3.1 Production of starch from cassava (edible starch)
3.2 Drying process
3.2.1 Determination of ash content
3.2.2 Determination of moisture content of fresh cassava,
textile and edible starch
3.2.3 Determination of cyanide content of fresh crushed
cassava textile and edible starch
3.3.4 Preparation of 5% of Na0H solution
3.3.4.1 Tytration experiment with AgN03 (Silver Nitrate)
CHAPTER FOUR
4.0 Result and Discussion
4.1 Table ash content
4.2.1 Determination of moisture content sample A
4.2.2 Sample b (textile starch)
4.2.3 Sample C Edible starch
4.3.1 Determination of cyanide content sample A
4.3.2 Edible starch (sample B)
4.3.3 Textile starch (sample C)
CHAPTER FIVE
5.0 Conclusion and Recommendations
5.1 Conclusion
5.2 Recommendation
Appendix A
Appendix b
Appendix C
Appendix d
Graps
References
The Title Page should be the first section of your project “Production Of Starch From Cassava”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Production Of Starch From Cassava by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Production Of Starch From Cassava should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Production Of Starch From Cassava research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Production Of Starch From Cassava project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work