Assembly And Testing Of 3.5KVA Petrol Generator
An engine-generator or portable generator is the combination of an electrical generator and an engine (prime mover) mounted together to form a single piece of equipment. This combination is also called an engine-generator set or a gen-set. In many contexts, the engine is taken for granted and the combined unit is simply called a generator.
The essence of this project work is to reveal the importance of assembly and testing of a 3.5kva petrol generator.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- SCOPE OF THE STUDY
- LIMITATION OF STUDY
- SIGNIFICANCE OF THE PROJECT
CHAPTER TWO
LITERATURE REVIEW
- THE ORIGIN OF ELECTRIC POWER GENERATOR AND INTERNAL COMBUSTION ENGINE (I.C.E)
- ORIGIN OF INTERNAL COMBUSTION ENGINE
- ORIGIN OF ALTERNATORS
CHAPTER THREE
- MATERIAL AND METHOD
- METHOD
- ASSEMBLY OF MAJOR PARTS OF PETROL GENERATOR AND THEIR MANTENANCE PROCEDURE
- PRESTART CHECKLIST
- HOW TO MAKE MIXED GASOLINE
CHAPTER FOUR
- TESTING OF GENERATOR SET
- AUTOMATIC STOPPING
- EMERGENCY STOPPING
- MAINTENANCE OF THE CRANKSHAFT CASE
- IMPORTANCE OF GENERATOR
- PROVIDING BACKUP SUPPORT INCREASE OF POWER FAILURE
- FAULTS
- GENERATOR SET OPERATION
- TROUBLE SHOOTING
- PRESENTATION OF DATA (GENERATOR PARTS)
- INSTALLATION ANALYSIS
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
CHATPER ONE
1.0 INTRODUCTION
An electrical generator is a device, that converts mechanical energy to electrical energy. The resent conversion of electrical energy into mechanical energy is done by a motor. Motors and generators have many similarities, a generator forces electric charge to move though an external electric circuit but it does not create electricity or charge which is already present in the wire of winding. It is somehow analogous to a water pump which creates a flow of water but does not create the water suite.
The two main parts of a generator can be described in either mechanical or electrical terms.
MECHANICAL
- Rotor: the rotating part of an electric mechine (generator).
- Stator: the stationary part of an electrical machine (generator).
ELECTRICAL
- Armature: the power producing component of an electrical machine in a generator, alternator or dynamo. The armature windings generates electrical current, this armature can be on either rotor or the stator.
- Field: the magnetic field component of an electrical machine. The magnetic field of the dynamo or can be provided by either electro-magnetic or permanent mounted on either. The rotor or stator the magnetic field will magnet the rotor as it will be rotating inside. The magnet because power transferred into the field circuit is much less union in the armature circuit, the Alternating current (A.C) generators nearly always have the field winding only a small amount of field current must be moving rotor using scrip rings. The required current and the automatic voltage regulator (AVR) pass the generated current through the A.C cables.
1.2 BACKGROUND OF THE STUDY
A power plant is defined as a machine or assembly of equipment that generates and delivers a flow of mechanical or electrical energy. Focusing on electric power generator, the main equipment needed for the generation of electric power is the generator. During coupling, it is connected to a prime mover which runs it and the electricity is generated. The type of prime moves determines the type of power plant.
THE MAJOR TYPES OF POWER PLANT ARE
- Steam power plant
- Internal combustion engine power plant
- Hydro-electric power plant
- Gas turbine power plant
- Nuclear power plant
1.3 AIM / OBJECTIVE OF THE STUDY
The aim of this study is to produce a well functioning and tested 3.5kva generator.
The objectives are:
- To maximize the availability of equipment (plant) for productive utilization.
- To reduce the cost of production due to breakdown
- To provide information on the cost and effectiveness of the generator
- To ensure safety of personnel.
1.4 SCOPE OF THE STUDY
The scope of this study will be strictly restricted to the assembly and testing of a 3.5kva generating set.
1.5 LIMITATION OF STUDY
Many constraints limited the extent this work would have gone they are as follows
- TIME-This is the time taken to run the entire research work.
We do not have all the time in our hands especially when we combine it with our regular academic work and other things
- FINANCE: We do not have enough funds to execute this research work.
- LACK OF INFORMATION: there is no information based like books on this topic but we being the first to write on this topic in Orlu campus did well with the few related ones found.
1.6 SIGNIFICANCE OF THE STUDY
A generator will do you no good unless it will function to its desired capacity when you need it most. The best way to ensure that this happens is by having an accurate assembly and testing method.
This study preserves and restores equipment reliability by assembling actual components.
The Title Page should be the first section of your project “Assembly And Testing Of 3.5KVA Petrol Generator”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Assembly And Testing Of 3.5KVA Petrol Generator by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Assembly And Testing Of 3.5KVA Petrol Generator should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Assembly And Testing Of 3.5KVA Petrol Generator research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Assembly And Testing Of 3.5KVA Petrol Generator project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work