Construction And Design Of A 6v Rechargeable Lamp
Man has been so used to electricity that he cannot do without it. The absence of electricity causes a lot of sadness in our daily lives. Due to this reason I decided to work on a by rechargeable lamp as my project.
The project is to see how one can construct a source of high without really generating is from an A.C source. I decided to write on this project in order to saw how I can implement it during and after school for home and marketing purpose.
This project is a lamp that was a 6v rechargeable battery to generate light which is very useful to man both at home and otherwise. It is a stem that is very portable and very effective mostly t might after which it has been charged.
1.1 INTRODUCTION
Electricity is of great importance to our lines and has done a lot of good to our present day society it is something we cannot do without, if we are to advance technological and otherwise.
It has really helped us in the powering of our system both in our domestic homes and industries.
But in our own country (Nigeria), there has been always these problems of lack of power and fluctuation in power supplied, which made me to see how I can design a circuit that can generate a source of light, eve in the absence of electricity or power from the general source of power supply (PHCN)
I decided to design and write on a rechargeable lantern, which I always use a my source of light in the absence of the major source of light. Ti is a portable lamp designed to be recharged using an alternating current (A.C) and to generate a source of light using a direct current (D.C) source.
When the system is charging using an A.C. source, the lamp will never come on which is the source of light. This is because I used light emitting diode (LED) as my source of light and it is a D.C component.
1.2 OBJECTIVE OF THE PROJECT
1. Rechargeable lamp helps one to understand and how a D.C source can generate a source of light.
2. It helps one to understand how to design a portable lamp
3. To see how a source of light will be generated in the absence of electricity or power supply
1.3 SIGNIFICANCE OF THE PROJECT
1. It helps me mostly in the night to read effectively
2. It helps me also to use light even to read absence of power in the house as an emergency.
3. The benefits that are derivable from it is more than the maintenance factor, I attribute it such as (no fuel required as compared with A.C generators).
1.4 THE REPORT LAYOUT
I went a long way, in term of reading browsing and other kind of researches, in order to see how this project will be accomplished (Designing of a rechargeable lantern).
The following are the various step I passed through in order to accomplish this project.
1. Theories and models relevant to rechargeable lantern
2. The component involved
3. The design
4. The circuit diagram
5. The implementation and testing
6. The result
7. The cost analysis
8. Recommendation
9. Conclusion
Title Page
Approval Page
Dedication
Acknowledgement
Abstract
Chapter One:
1.0 Introduction
1.1 General Description Of The Project
1.2 Objective Of The Project
1.3 Significance Of The Project
1.4 The Report Layout
Chapter Two:
2.0 Literature Review
2.1 Historical Background Of The Project
2.2 Theories And Model Relevant To The Design
2.3 System Component Description
Chapter Three:
3.0 System Design
3.1 Description Of The System Building Blocks
3.2 System Specification And Block Diagram Development Into Working Circuit And Power Supply Unit.
3.3 Description Of The Overall Operation Of The System
3.4 Design Calculation / Component Analysis
3.5 Component List
3.6 Complete Circuit Diagram Of The System
Chapter Four
4.0 Implementation Testing And Result
Chapter Five
5.0 Cost Analysis
5.1 Problems Encountered
5.2 Recommendation And Conclusion
References
The Title Page should be the first section of your project “Construction And Design Of A 6v Rechargeable Lamp”, providing essential details like the project title, your name, your supervisor’s name, the institution, and the submission date. After that, the Abstract offers a brief summary of your project, touching on its purpose, methods, results, and conclusions in 150-300 words. The Acknowledgments section is where you can thank those who supported your research, such as your supervisor, peers, or organizations that provided resources.
Next, the Table of Contents organizes the Construction And Design Of A 6v Rechargeable Lamp by listing its chapters and sections, along with page numbers for easy reference. The List of Figures and List of Tables help guide readers to specific visual elements like graphs, charts, or tables included in the document. There should also be an Abbreviations and Glossary section to explain any specialized terms or acronyms, making the content clearer to readers unfamiliar with the technical language.
The main body of the Construction And Design Of A 6v Rechargeable Lamp should start with the Introduction, which provides background information, outlines the research problem, states your objectives, and gives a brief overview of your research methods. Following that, the Literature Review offers an in-depth look at previous research relevant to your project, identifying gaps your study aims to address. The Methodology section then explains the research design, tools, and data collection methods you used to conduct the project and analyze the data.
In the Results and Discussion section, you present your findings and discuss them in relation to the Construction And Design Of A 6v Rechargeable Lamp research questions or objectives, often using tables or charts to help explain the data. The Conclusion summarizes the key results, discusses their implications, and suggests possible directions for future research. You may also include recommendations based on your findings, offering practical advice for improvements or applications. Finally, the Construction And Design Of A 6v Rechargeable Lamp project should include a References or Bibliography section to list all the sources you cited, as well as Appendices for any additional material. A Statement of Originality is often included to confirm the authenticity of your work